Goodbye Woody, Welcome Etch //at 00:53 //by abe

It finally happened. I installed Debian Etch on my last Woody box, a 400 MHz Pentium II with 576 MB RAM named gsa which is my home desktop since I bought it at LinuxTag 2003 in Karlsruhe.

And no I didn’t do a dist-upgrade, neither direct no via Sarge. As already planned I removed some no more necessary operating systems from that box and installed Etch on the freed disk space. Woody is still installed on that box in parallel and was recognized perfectly by Etch’s installer.

I took a few hours but also was big fun to go through Etch package list and to decide what to install. Overall the installation of 5 GB of software took about half a day.

In general everything went fine, the only thing I’m yet missing is sound. Etch didn’t seem to recognize my soundcard at all although it’s a well-known brand and defacto standard for many other soundcards: a Creative Labs Soundblaster. Well, the 16-Bit ISA version, needing the full length of the slot. Worked fine under Woody. Well, I hope I’ll get it working again manually.

What on the other hand is really nice with udev hell —eh— hal and all those new automatic bells and whistles: The desktop (well, at least GNOME Nautilus as well as XFCE, but probably also KDE) recognises when I insert a 3.5” floppy into the drive and shows me a nice floppy icon on the desktop. You think, that’s impossible? Floppy drives don’t inform the rest of the system when a floppy has been inserted without you polling the drive every few seconds? Well, USB floppy drives can. And they do. :-)

I still need time to migrate all the old settings from Woody to Etch. I’ll probably stick with FVWM, but perhaps will use the GNOME enabled version. What’s already done is the migration from tcsh to zsh. On all new or dist-upgraded systems after Etch I’ve chosen zsh so with my last Woody installation retiring I’ve also fully migrated to zsh.

So I’ve got now most of my active private boxes running Etch. Only the noone.org web and mail server “sym” (an amd64 box) as well as my 133 MHz ThinkPad “bijou” are still running Sarge, both with 2.6 kernels.

So with switching to Etch on gsa, I also got no more Debian box running a 2.4 kernel. The only 2.4 kernel I run is on my FreeWRT WLAN router named pluriel, which runs 2.4.33.3. But I expect that 2.6.18 will be as stable and long lasting as the famous and rock-solid 2.4.18 from Woody. 18 seems to be Debian’s favourite kernel minor version recently. ;-)

The days of my last running Woody are numbered… //at 23:05 //by abe

As many of the Planet Debian readers know, I bemoan Galeon 1.2 and therefore Woody. For a long time I haven’t found an appropriate browser replacement for Galeon 1.2 in Sarge, so I never switched my home workstation called “gsa” (Pentium II, 400 MHz, 572 MB RAM) to Sarge, since Woody was rockstable and just worked.

Though, after a few Galeon 1.3/2.0 rants, someone pointed me to Kazehakase, which indeed is a fine Galeon 1.2 replacement. But I noticed that Kazehakase in Sarge was in an early stage and the Kazehakase from testing (now Etch) were already much more matured.

So in comparison to Sarge with Etch I won’t have the problem of not having a mature and sage web browser in main. And due to security support for Woody ceased a few months ago and Etch is now declared stable, it’s time to reinstall my last Woody box with Etch.

For that, a repartioning of it’s two hard disks (8 GB and 40 GB) sounds like a good idea and so I had look, what’s on all those partitions where I once had a shot on quite a few Linux distributions and other unix-like operating systems. (Although I was already a big fan of Debian at that time, I wanted to look over my own nose and ordered a few CDs of free operating system at LinISO.de.)

So here’s what I found, never really used and will throw away quite soon:

• RedHat 9
• Mandrake 9.2beta2
• FreeBSD 4.8
• OpenBSD 3.3
• one more, not yet identified (or perhaps even never formatted) Linux partition

That should give enough space for an Etch installation without touching the Woody installation first. Thanks to Venty, I’ve got a DVD drive for that box, so I can install from DVD.

And for toying around with all those other neat and free operating systems nowadays, I’ve got my MicroClient Jr. named “c2”.