Conkeror in the Debian NEW queue //at 21:39 //by abe

I already mentioned a few times in the blog that I’m working on a Debian package of the Conkeror web browser. And now, after a lot of fine-tuning (and I still further new ideas how to improve the package ;-) Conkeror is finally in the NEW queue and hopefully will hit unstable in a few days. (Update Thursday, 03-Jul-2008, 18:13 CEST: The package has been accepted by Jörg and should be included on most architectures in tonight’s updates.)

Those who could hardly await it can fetch Conkeror .debs from http://noone.org/debian/. The conkeror package itself is a non-architecture specific package (but needs xulrunner-1.9 to be available), and its small C-written helper program spawn-process-helper is available as package conkeror-spawn-process-helper for i386, amd64, sparc, alpha, powerpc, kfreebsd-i386 and kfreebsd-amd64. There are no backported packages for Etch available, though, since I don’t know of anyone yet, who has successfully backported xulrunner-1.9 to Etch.

Interestingly the interest in Conkeror seems to have risen in the Debian community independently of its Debian packaging. Luca Capello, who sponsored the upload of my Conkeror package, pointed me to two blog post on Planet Debian, written by people being fed up with Firefox 3 already and are looking for a more lean, but still Gecko based web browser: Decklin Foster is fed up with Firefox’ -eh- Iceweasel’s arrogance and MJ Ray is fed up with Firefox 3 and its SSL problems.

Since my previously favourited Gecko based web browser Kazehakase never became really stable but instead became slow and leaking memory (and therefore not much better than Firefox 2), I can imagine that it’s no more an candidate for people seaking for a lean and fast web browser.

Conkeror has some “strange” concepts of which the primary one is that it looks and feels like Emacs:

• The current location is shown in a status bar below the website, where Emacs usually shows buffer names. All input, even entering new URLs to go to, is done via the mini-buffer, an input line below the status bar.

• Instead of tabs it uses Emacs’ concept of buffers. So no tab bar clutter and though easy access to all currently open pages.

• It has no buttons, menu-bar or such. And except the status bar and mini-buffer, it uses the whole size of the window for the displayed web page. This is the main reason why I prefer Conkeror on the 7” EeePC: I don’t want to waste any pixels for buttons or menu bars and still have a fully functional web browser.

• It of course has Emacs alike keybindings (with a slight touch of Lynx). While this may seem awkward for the vi world (Hey, they have the vimperator^*, also in Debian since a few days!), as an Emacs user you just have to remember that you web browser now also expects to be treated like an Emacs. It just works:

  C-x C-c

  Exit Emacs -eh- Conkeror

  C-x C-f

  Open File -eh- web page in new buffer

  C-x C-b

  Change to some other tab -eh- buffer

  C-x C-v

  Replace web page in this buffer and use the current URL as start for entering the new one

  C-x 5 2

  Open new frame -eh- window

  C-x 5 0

  Close current frame -eh- window

  C-x k

  Close tab, -eh- kill buffer

  C-h i

  Documentation

  C-s

  Incremental search forward

  C-r

  Incremental search backward

  C-g

  Stop

  l

  Go back (Think info-mode)

  g

  Go to (Open web page in this buffer)

  (Hehe, I like the faces of vi users having read these keybindings and now wondering how to remember them. SCNR. Well, sometimes vi key bindings are a mystery to me, too. :-)

  There are of course many more and nearly all are the same as in Emacs, even the universal argument C-u and the M-x command-line are there. E.g. C-u g lets you open a web page in a new buffer, too.

• Conkeror also has very promising concept for following and copying links with the keyboard only. Opera is very inefficient here since you have to jump from link to link to get to the one you want. In Conkeror you just press f for following or c for copying links and then all links on the currently shown part of the page show a small number attached to it. Then you just enter the number (and additionally press enter if the number is ambigous) and the link is either opened or copied to the clipboard.

  A funny anecdote about how this concept grew over the time: Early versions of Conkeror (back in the days when it just was a Firefox externsion as vimperator) numbered all links on the page, not only the visible ones. On large pages with many links or buttons (e.g. my blog ;-), this took minutes to complete. The idea to just number the visible links is so simple and important – but someone first needed to have it. :-)

Footnotes

*) I just noticed that there is now also muttator, making Thunderbird look and behave like vim (and probably also mutt), too. Wonder into which e-mail client the Emacs community will convert Thunderbird. GNUS? RMAIL? VM? Wanderslust? What will it be called? Wunderbird? Thunderslust? (SCNRE ;-)

How to get Network Manager working with ratpoison //at 00:59 //by abe

Using GNOME Network Manager is a neat way to connect to wireless or virtual private networks from a laptop running Debian Lenny, Sid, Etch with Backports or any of the *buntu distributions. You can control everything from the system tray. But not all window managers have a system tray. And with some window managers it’s not obvious how to make them work with one of those lean third party trays and panels.

Especially my favourite window manager for small displays as on the EeePC – ratpoison – insolently puts any panel or tray in the middle of the screen by default. It took me a moment to find out how to make ratpoison work with my favourite third party system tray trayer (which can handle transparency and is only a system tray, no taskbar).

First we need to make ratpoison ignore the trayer on the one hand and and reserve space for it on the screen. Fiddling around with preconfigured frames didn’t work well and the following way is also more straight forward:

1. trayer always has “panel” as window title, so adding the following line to your .ratpoisonrc makes ratpoison ignore trayer:

   unmanage panel

2. Now all windows overlap the trayer, so we need to configure the space for it. Trayer in the default configuration shows up at the bottom and has a height of 26 pixels, so we tell ratpoison to add a padding of 26 pixels at the bottom of the screen by adding the following line to the .ratpoisonrc:

   set padding 0 0 0 26

Now we are confronted with the problem that these settings only apply to new windows, not ones which were already running when ratpoison starts. I usually start my X session using an .xinitrc or an .Xsession which calls the window manager using exec at the end.

We can start the trayer later though by spawning a subshell in the background with a sleep at the beginning. Also the Network Manager applet (nm-applet) can be started that way. In my case the end of the .Xsession looks like this:

( sleep 1; \
  trayer --align right --edge bottom --distance 0 \
	 --expand true \
	 --transparent true --alpha 128 --tint 0 \
	 --SetDockType true --SetPartialStrut true & 
  nm-applet & ) &

exec ratpoison

The result could look like this:

The other programs in the system tray are from right to left: nm-applet (GNOME Network Manager), Twitux (GTK Twitter Client), Audacious, Opera, Pidgin (formerly known as GAIM), Icedove (unbranded Mozilla Thunderbird). The clock on the bottom left is from the package osdclock.

Oh, and although I’m fine with trayer: if anybody knows a possibility to control the GNOME Network Manager without the need for a system tray, I would be very happy if you could tell me. :-)

Update 18-June-2008 23:45:

Matto Fransen used my howto to get ratpoison and nm-applet working together on Ubuntu. He also explains in his blog post, what may be necessary to get nm-applet working as intended in the first place — things I already had forgotten when I wrote this posting initally. :-)

Debian and GPRS with the Nokia E51 //at 00:39 //by abe

A while ago I wanted to have internet over GPRS (either EDGE or UMTS) via my Nokia E51 working before I leave for the weekend. But whatever I tried, I always got an ERROR if I sent any AT command. Even ATZ and ATH resulted in errors. So started googling for all components: I found AT commands which are said to work with the Nokia E51, I found AT commands which are said to work with Swisscom GPRS and I found many sites describing how to setup a bluetooth modem.

But since the even those AT commands which should work with both, Swisscom GPRS and Nokia E51 didn’t work at all, I noticed that all the Nokia E51 howtos were using the USB cable. So I tried that, too, and it worked immediately. It looks very strange to me that the set of AT commands is dependend on which way you connect to the phone. :-/

So here’s my working PPP config:

hide-password
noauth
connect "/usr/sbin/chat -e -f /etc/chatscripts/swisscom-gprs"
/dev/ttyACM0
460800
defaultroute
crtscts
user "guest"
usepeerdns
noccp
bsdcomp 0,0
lcp-echo-failure 10000
lcp-echo-interval 1000
asyncmap 0
novj
nomagic

TIMEOUT 5
ABORT BUSY
ABORT 'NO CARRIER'
ABORT VOICE
ABORT 'NO DIALTONE'
ABORT 'NO ANSWER'
ABORT DELAYED
ABORT ERROR
'' \nAT
TIMEOUT 12
OK ATH
OK ATE1
OK 'AT+CGDCONT=1,"IP","gprs.swisscom.ch"'
OK ATD*99#
CONNECT ""

So I have now four levels of mobile computing available:

• Nokia E51 with T9 and phone keyboard (for short texts)
• Nokia E51 with Nokia SU-8W bluetooth keyboard (for longer texts and emergencies, see photo on the right)
• ASUS EeePC (7", 630 MHz Celeron, 2GB RAM, 4GB SSD) with Nokia E51 as modem (complete computer, but still small, portable and nearly always with me)
• Lenovo ThinkPad T61 (14" wide screen, 2.2 GHz Core2Duo, 4GB RAM, 160 GB SATA Disk) with Nokia E51 as modem (complete computer with power and disk space)

Should suffice in nearly all situations. ;-)

One month with Debian Lenny on the EeePC //at 00:21 //by abe

I ogled with an ASUS EeePC since it was announced, but didn’t want to order one abroad. So I waited until they became available in Switzerland. Digitec is the official EeePC importer for Switzerland and seeems also to be the moving power for yet to come the Swiss localisation of the EeePC. But initially they only offered imported EeePCs with German keyboard layout, but since I really got used to the US layout, I didn’t want to buy ay new laptops or keyboards with German layout.

When asking them about US layouts they told me they won’t import from the US and that their competitor Steg Computer is importing US models. But I wasn’t comfortable with Steg and EeePCs also were more expensive there, so I hesitated ordering at Steg.

So it was quite unexpected for me when US models showed up on digitec’s website. (Interestingly I never received any mail from their advertised EeePC newsletter, not even when they added 2G models t their repertoire.)

So at the end of March (and therefore later as most other geeks ;-) I ordered an ASUS EeePC at digitec. For me, white laptops look like Macs (and Macs are for sissies or masochists ;-) — so I had no problems to decide that I want a black EeePC with US keyboard layout. 2G was to small for my purposes (and also not that much cheaper) and 8G not available. So I went with the 4G, since Debian doesn’t need so much space if you choose the right packages (i.e. neither or at least not that much of GNOME or KDE ;-). I preferred the 4G over the 4G Surf because of the bigger battery capacity (and not because of the webcam which I consider funny but useless:-).

Initially the delivery date was set the 28th of March. Then it was subsequently set to “beginning of April”, “mid of April”, “end of April” and “beginning of May”. It finally arrived on 8th of May. In the meanwhile there were reports that even the 4G has been equipped with the smaller battery of the 4G Surf because of some battery shortage after some battery plant burnt down. But fortunately the delivery problems with black 4G US models doesn’t seem to have its reason there and my 4G has a 5200 mAh battery (at least according to its label and ACPI).

I also ordered a 2 GB bar of Corsair ValueSelect RAM so that I can pump up the RAM of my EeePC by factor four (for about 10% of the price of the EeePC itself) resulting in having half as much RAM as disk space. Well, I guess, I won’t do suspend to disk in that configuration… ;-)

The original Xandros based Linux only noticed 1 GB of the installed 2 GB as already noted on many other places in the web. But that doesn’t really matter, since it only lasted until I found out how to restore it from DVD in case I want to sell the EeePC later (e.g. for getting the successor). It’s fine for novices, but Linuxes feel strange if you can’t even get a console or a terminal with a command line. ;-)

The Debian EeePC installer worked fine except that it argued over a checksum error on our mirror which wasn’t reproducable after the installation anymore. I’ve chosen the EeePC to be my first (nearly) pure Lenny installation — compared to the three machines running Sid (i386, amd64 and kfreebsd-i386). It though has a few packages from experimental (mostly xulrunner-1.9) installed.

As window managers I have installed ratpoison, FLWM and FVWM. ratpoison — best described as screen for X (although you can’t detach and reattach) since it’s my personal preferences for being productive without big screen resolutions and flwm for a low-resource window manager which can be used intuitivly by both, geeks and non-geeks (and still doesn’t look like Windows at all ;-). And FVWM is installed because it’s my default window manager on all machines with bigger or multiple screens – to be able to compare it with my usual environment.

As web browser I’ve got Opera as primary browser (as everywhere else, too) and Conkeror (the EeePC is the test-case for upcoming Debian package of Conkeror) as well as links2 and lynx on the (nearly) text-only side on it, although I need them seldomly.

As office programs (as I would ever need some ;-) I’ve got AbiWord and Gnumeric installed since I already use a few GNOME applications (e.g. Network Manager, Twitux, etc.) and OpenOffice.org would take up 170 MB more disk space (then including OOo Draw and OOo Impress) and Siag Office is no more in Debian since years. (Initially I had OpenOffice.org installed instead of AbiWord and Gnumeric until I noticed that I need some of the GNOME libraries anyway.)

I also decided that I will need LaTeX then and when so TeX Live also got its chunk of the 4 GB of disk space.

I also have a bunch of games on the EeePC. Unfortunately there are a few games which don’t work well on the EeePC due to it’s resolution being smaller than 800x600, so I deinstalled them already again, e.g. I can’t play Cuyo on the EeePC but flobopuyo. Sauerbraten segfaults, but Doom (prboom with freedoom WADs) works fine. Further non-working games unfortunately include Battle of Wesnoth and XFrisk.

Still, although quite some parts of GNOME and GNOME Office, TeX Live, ScummVM with Flight of the Amazon Queen and Beneath a Steel Sky, GNU Emacs 22, Iceweasel 3 (aka Mozilla Firefox 3), Icedove (aka Mozilla Thunderbird) and the Iceowl (aka Mozilla Sunbird) are installed, only 2.3 GB of the available hard disk space are used by the installation (i.e. without my home directory).

Oh, and btw: Although except the very compact and a little bit wobbly keyboard the EeePC doesn’t feel really small to me (I’ve got quite small hands), but when I sat down in front of my 14” ThinkPad T61 after a day or two with EeePC, the T61, — especially screen and keyboard — felt huge as if it would be some 17” or even bigger notebook. ;-)

OTOH I still think that a 1920×1200 (which means nearly four xterms in a row) resolution on a 14” notebook would be a good idea, especially compared to the 1440×900 (which means nearly three xterms in a row) my T61 has. ;-)

Personal Resumée after one month

Pro EeePC

• It’s geeky. If you show up with it, people want to lift it to see how much it weights and try the tiny keyboard. They’re surprised that 800x480 aren’t that small and that the performance isn’t that bad.
• Very compact and robust. With the T61 I always fear that its edges are too close to the the outside of my backpack and could be damaged that way.
• The price of course: CHF 499 at digitec (plus CHF 54 for the 2 GB RAM)
• Runs Linux ex factory. So yu don’t have to expect that many driver hassles.
• RAM upgrades are very straight forward and do not void the warranty. (BTW: The sticker over one of the screws which probably should prove the integrity can be removed and placed again easily… :-)
• The weight. 0.92 kg can be easily held wit one hand, also because of less leverage effect as with full-size laptops.
• The SSD despite it’s size. Being such lightweight you accelerate the EeePC unmindfully even when it runs. But it doesn’t matter, at least not to the hard disk. And it boots very fast, especially after the usage of insserv.
• Intergrated Ethernet network interface. (Hey, the MacBook Air hasn’t a builtin one, not even an external shipped with it! ;-)
• Three USB sockets (the MacBook Air has only one which is usually taken for the Ethernet network adaptor — Ok, with the EeePC usually one is taken for the Bluetooth dongle, but then are still two sockets left… ;-)
• Great contrast on the builtin screen.
• External VGA output. You have to configure X.org to make the virtual screen big enough (e.g. 2048×2048 instead of the default 800×800).
• Despite its size quite a lot of space for modifications inside the case. Especially a bluetooth case mode should be no big deal.

Contra EeePC

• The keyboard: keys smaller than usually (ok, wouldn’t work otherwise ;-), very wobbly, no precise contact depth (pressing Shift and Fn with one finger often doesn’t press Fn right), not all keys on the same plane, unusual offsets between the key rows (the number row has about half a key width offset to the left) or position of keys (I often hit Ins when I want Home, Del when I want Backspace or Fn when I want Ctrl, the ~ key is between Esc and F1, Up is between Slash and Right Shift, etc.)
• The position of the power button: It’s exactly where I want to put thumb when holding the EeePC solely with the right hand. And yes, I already accidentially switch it off several times because of that. For luck the button doesn’t work at all when the lid is closed, because you still can reach it easily while it’s closed.
• The mouse button(s): It only has two buttons which are one part you can press more to the left and more to the right side. And if you press it in the middle you randomly get either a left or a right click. You have to press it very hard to get both clicks at the same time. (e.g. to emulate a third middle button). Three separated mouse buttons would have been way better.
• It has (only) a touchpad. I definitely prefer thumbsticks as the ThinkPads have, but got used to it, though. I have seen worse touchpads, too.
• The noisy and not very precisely beared fan, which seems to strife its environment when the EeePC is being accelerated. Whih happens quite often because of its size and weight and because the SSD doesn’t mind acceleration. The fan does mind – and you hear it. :-(
• Some programs need minimum 800x600 resolution to work well.

Pro ThinkPad (in direct comparision)

• Thumbstick.
• One of the best laptop keyboards around.
• Three easy to distinguish mouse buttons.
• Even ressource-hungry programs like Liferea work fine.
• Quite big screen resolution (1440×900).
• Bigger battery, space for additional batteries.
• Could be a workstation replacement.

Pro Lenny on the EeePC

• The installer image of the Debian EeePC Project works out of the box. All necessary drivers are available, if you include the non-free repositories and the eeepc.debian.net repositories.
• Stable enough for daily use. (IMHO Debian Testing – and even Debian Unstable – is more stable as many other distribution’s stable releases, e.g. those from SuSE.)

Con Lenny on the EeePC

• My favourite feed reader Liferea has changed its cache format since the version in Debian Etch, so I can’t sync Liferea caches between my Debian Etch running T61 and the Testing running EeePC. Well, fortunately the version of Liferea in Debian Etch still works on Debian Lenny, so I just downgraded the package to the version from Etch and set it on hold. I don’t use it on the EeePC though since it needs way too long to start (about 10 to 15 minutes compared to 1 to 3 minutes on the T61)

Summary

I’m very happy with the EeePC and I didn’t expect that it would replace my 14” ThinkPad in so many (but still not all) situations. :-)

A good day //at 23:32 //by abe

Today was a good day — at least if I average all the things happened today. And since Twitter.com is currently down and there’s no way all those things fit in 140 characters, I decided to pack them in a “short” blog post:

• This afternoon one backplane of our newest backup server caught fire. :-( No collateral damages though. :-) The machine is currently at the manufacturer and should be back on Monday.
• My EeePC (more about it in an upcoming blog post) recently overheated and switched off. It looked as if it since then didn’t turn off correctly anymore, but power and the fan stayed on although the operating system was shut down. Today I found out with help of the debian-eeepc-devel mailing list that my EeePC wasn’t damaged but the snd_hda_intel driver caused the machine to not shut down correctly. One rmmod line into /etc/default/halt and it shuts down perfectly and fast again. :-) See also the hint in the Debian Wiki.
• Even more: I’m sure that it not even has been turned by being hit by something through its neopren bag inside my backpack as I initially expected. It turned out that I must have not noticed that it wasn’t properly shut down and put it in the neopren case in that condition :-( since the power button simply doesn’t work when the lid is close. The good news: It doesn’t seem to have carried away any damage. :-)
• I had the same problem as Beat had: I couldn’t import certificates into my Nokia E51 mobile phone. I already tried to import the PEM and the DER versions of the CAcert root certificates but it just didn’t work. After Beat found out (Kudos to maol who pointed me to Beat’s blog posting), which certificate format is necessary, I found out that while the CAcert PEM certificates have the correct Content-Type header (application/x-x509-ca-cert) the DER certificates have not — they are served as text/plain. Downloading them to my server, adding the right content type to the config and downloading them from there again with the mobile phone worked fine and I now don’t need to acknowledge anymore the certificate of my IMAP server each time I want to read my e-mails on the mobile phone. :-)
• One more EeePC thing. During a discussion on the debian-eeepc-devel mailing list, I noted that the maximum summed up resolution of the internal and external display seems to be 800×800, but it turned out that you can configure that in your xorg.conf. :-) The screen section of my xorg.conf now looks like this:

  Section "Screen"
          Identifier      "Default Screen"
          Monitor         "Configured Monitor"
          SubSection "Display"
                  Virtual         2048 2048
          EndSubSection
  EndSection
  

  See also the xorg.conf in the Debian Wiki.

So if I sum up the smileys in this blog posting, I get 5 happy ones and only 2 sad ones. I think being happy outrun being unhappy today. ;-)

Now I want to dive into my bath tub to get this smell of burning servers off me and my cloths. ;-)

New mobile phone and what the Nokia 6310i did better than the E51 //at 00:31 //by abe

Habits control our choice sometimes more than we would like to admit…

New mobile phone

Since about two weeks ago I’ve a new mobile phone. The Nokia E51 will replace my slowly dying Nokia 6130i.

I knew I needed a new mobile phone when my 6310i started to turn off itself shortly after I turned it on. I needed up to about ten times switching it on to make it stay on. Sometimes it already switched itself off before I could enter the PIN. Looks like a loose contact, but I never figured out where it is.

Although I know about Nokia’s behaviour in Germany, I still had to buy a Nokia, because after using a 6130 (the GSM 1800 only clone of 6110 and 6150), a 6210i and the already mentioned 6130i over the last decade, I got so used to how Nokia mobile phones are navigated and how you type with Nokia phones (blank on 0, point and comma on 1, case changing on #), everything else (especially those with blank on 0 and case changing on *) would be worse than the half-dead mobile phone, I’m currently using.

Spoilt for choice

So which Nokia? For a long time I refused to buy a mobile phone with a camera or radio in it. But since the E70 was no more available (and is said to have quite buggy software) and the E61 has been replaced with the E61i, there are no more smartphones without a camera, at least not from Nokia. But I also found some useful uses of camera phones. After a while I could track down the number of choices to four: Communicator E90, E61i, E65 or E51:

The picture above shows that the main differences of those models is size: Although having a QWERTY keyboard on the phone would be nice (for ssh, Jabber, the web, etc.) and the E90 being only slightly bigger than the 6310i on the paper, the size difference to the 6130i is more than only noticeable since the 6310i tapers off at the top. Besides, for the price of an E90, I get an E51 and an EeePC together… (Thanks to maol in whose blog I read about Sizeasy.)

The E61i also has a (very small) QWERTY keyboard and is primarily only much wider than any of the other phones. It even has no bigger screen resolution than the E51 or E65. (Only the no more available E60 – a normal monoblock smart phone like the E51 – had a better resolution: 352x416 pixel instead of 240x320 pixels.) And since I usually carry my mobile phone in my trouser pockets, width matters most.

So I had the choice to either get a phone which is too big for my trouser pockets or one without a QWERTY keyboard. The I remembered those foldable external keyboards for PDAs. There are at least three different makers of foldable bluetooth keyboards said to be working with Nokia Symbian S60 3rd Edition phones, so a QWERTY keyboard on the phone itself was no more important. (Only passwords will need to be entered over the number keypad since I don’t want to broadcast them… ;-)

The choice between E65 and E51 was made easier by their reviews (E65, E51) at Xonio: The E65 seems to have not that good standby and phoning times while the E51 seems to be quite good regarding endurance.

I looked through the usual shops around Z¨rich HB: Swisscom Shop, MobileZone, Phonehouse: All had the same prices (about CHF 250 for a two years contract at CHF 25 per month), except that Phonehouse had no E51 available in the shop. Interestingly digitec had a much lower price (CHF 100 for the same contract) and the choice of color (the shops always only offered one color), so I ordered a black one there.

Converting a prepaid card to a postpaid contract isn’t that easy

I wanted to change from a prepaid card to a postpaid contract, both at Swisscom, so I already own a SIM card. But digitec only offers new contracts including a SIM card or contract renewals, but no switching to a contract with keeping the number. And a new SIM card costs CHF 40 extra in their online shop. So I called their hotline and asked. The answer was: I need a new SIM card since prepaid SIM cards can’t be converted to postpaid SIM cards (but can be used with different providers).

When I came to the shop, the employee needed three tries to fill out the Swisscom form for the number migration and still did it wrong somehow. No postpaid contract acknowledgement from Swisscom after two workdays. So I called their hotline. They told me, the wrong SIM card number has been entered and I need to make digitec to enter the correct one.

A few days later back at the shop they were overextended. After a while an internal e-mail was on the employee’s screen which clearly stated that in case of prepaid to postpaid conversions (and a few other cases) no new SIM card must be given out and if this happens too often for the same employee he will be charged the CHF 30 a new SIM card costs digitec… (So they have a 25% margin of every sold SIM card…)

About one hour after they closed their doors (I was there about ten minutes before shop closing time) Swisscom had accepted the contract changes and I had a credit note of CHF 40 for the erroneously sold SIM card. And the mobile phone became even cheaper than in all the other shops. :-)

New gadget, new features

So after a week, I can say that in general I’m quite happy with the new phone. It has a nice web browser, an IMAP over SSL capable mail reader and a feed reader, it can connect to the internet via WLAN and the 240x320 resolution isn’t as bad as I expected. I already have a Symbian port of PuTTY on it and sshing into my workstation works fine, even if I currently only have the phone keyboard and T9 as input device and helper.

I also have Opera and Opera Mini installed, but to my own surprise the included web browser from Nokia (said to be based on Apple’s HTML rendering engine WebKit which itself is based on KDE’s HTML rendering engine KHTML) is way better, especially in navigation, even although Opera Mini 4.1 caught up a little bit in comparison to Opera Mini 4.0. (Hey, and you hear that from a web browser fetishist and Opera fan!)

The only thing which currently really bugs me on the builtin web browser is that even an enforced updating of my feeds sometimes just results in nothing. Maybe a firmware upgrade can help…

As barcode reader, I have installed the i-nigma Reader. (The Quickmark QR Code Reader download just showed the content of something which seems to be a Windows DLL instead of downloading it. *plonk*) It’s amazing how fast the i-nigma Reader recognizes a 2D barcode from Semapedia on my laptop screen.

Of course I also have ScummVM on my new Symbian phone.

I will also play around with Amora which turns your Symbian S60 mobile phone into a remote control for your presentations on Linux (or any other unixoid operating system) running laptop as soon as I managed to get an amd64 Debian package of it. (Currently there seems only i386 packages and no source packages available, but this may be due to the “Show all downloads” link gives a server error…) Oh, and many thanks to foosel since I found Amora in her blog.

BTW: Any recommendations for a free (preferably free as in DFSG) Jabber and/or IRC client for Symbian S60 3rd Edition? I already downloaded and installed Gizmo5, but somehow it refuses to work each time I try to create an Gizmo account.

Accessories

Since the E51 has no QWERTY keyboard, I ordered a Nokia SU-8W Foldable Bluetooth Keyboard at Brack. It was a little bit bigger and thicker than expected, but OTOH the metal case seems to be very stable and robust.

Since this keyboard is designed to fit on Nokia mobile phones it also has the two Nokia typical soft keys and the middle select key. So nearly all phone functions can be used with the external keyboard, even turning off the phone’s key lock. Only locking the phone’s keys again doesn’t work via the external keyboard.

Additionally I equipped my E51 with a 2GB microSD card. Probably a bluetooth headset for driving will come once, too.

What the Nokia 6310i did better than the E51

There are a few things which are annoying regarding Nokia’s UI consistency over the years. That the backspace key is no more the right soft-key is ok. It took me only five tries to get my e-mail account setup without hitting the abort key (no “Do you really want to abort?” questions ;-) instead of backspace key.

But what’s really annoying is that the menu navigation via number keys only works for the first level and no more for all levels. So no more “menu 4 4 4” to switch to manual network selection.

It’s also annoying that you (or at least I ;-) can’t enter phone numbers as the recipient of SMS directly anymore, at least those SMS never reach their receipient neither do I get an error message.

Same counts for the missing acoustic acknowledgment of locking the keypad. You only hear pressing the first key but not even the second key anymore.

And if you press the volume keys on the side of the phone, you also have neither acoustic nor visual feedback if you pressed them hard enough so that the volume changed. The 6310i had visual and acoustic feedback.

The alarm clock in the E51 seems to be artifically castrated: After having pressed the snooze button two or three times there is no more snooze button on the right the soft key anymore. With the 6310i you could press snooze as often as you want. Only disadvantage with the 6310i in regards of the alarm clock: the snooze time was much too long (10 minutes)…

Oh, and what’s also annoying is that I can’t move over the whole addressbook of my 6310i in one piece but have to send each contact via bluetooth or infrared and then the E51 even get’s the contact names mixed up: ‘Beckert, Axel’ becomes ‘Firstname: “Beckert,” Lastname: “Axel”’… Great! I have to edit nearly all contacts manually… The cut and paste feature helps here, but it takes about one to two dozens of key clicks to copy the whole content of a filed into the clipboard…

The E51 can run several applications at the same time and that you can switch between them any time. While that’s generally a nice feature I started using quite soon, it’s sometimes annoying that you have to wait up to a second or so after you’ve chosen some menu entry until you can do anything further. Also the screen often flickers while loading applications, showing them, then showing only the background, showing them again, etc.

… but finally

I already got used to the new mobile phone so much that I already have the feeling that my old 6310i became more thick since I have the E51. (Won’t think about how thick the about ten years old 6130 feels now compared to the slim E51… :-)